国道108线K15+760~K15+980段路堤边坡稳定性研究及处治效果监测

对国道108线广南段K15+760~K15+980段高路堤边坡稳定性的分析与计算,分析了路堤产生变形的原因,并提出了相应的处治加固措施,同时进行了包括表面位移监测、路面沉降监测等监测,总结了边坡不稳定情况下路堤表面位移及路堤沉降变形的规律,从而掌握了路堤的变形动态,控制了处治施工活动带来的超量位移,进而确保了路堤及边坡的稳定。     

黄河下游堤防地质险段研究

由地质作用影响形成的易出险堤段称为地质险段 ,主要包括活断层作用影响形成的堤基易渗漏段、强地震高发区段和地基稳定性差段等。构造节点是识别地质险段的重要的河流地貌标志之一。根据成因 ,本文将黄河下游的地质险段分为三类 ,即新构造险段、沉降险段、断裂复活险段。针对黄河下游堤防地质特征 ,圈定出东坝头、大刘屯—董口黄河南岸和路那里—十里堡黄河南岸地质险段 ,提出了治理的有关措施     

立交桥多跨连续梁复位监测

某立交桥在长期使用中,弯桥处多跨连续梁发生横向滑移近40cm,为此对该梁进行顶升和横移的复位施工。使用位移传感器对多跨连续梁的顶升和降落进行监测和控制,同时使用应变片监测多跨连续梁的应力。监测结果表明,相邻桥墩处的连续梁最大竖向位移差在3.40～7.89mm之间,连续梁产生的最大附加应力在-2.06～1.78MPa之间,连续梁没有裂缝产生,从而确保了多跨连续梁在复位施工中的安全。同时对钢支架的应力进行监测,得出钢管混凝土柱始终处于严重偏心受压状态的结论。在长时间监测中,采取分段测试然后测试数据累加的方法,减小了应变仪连续使用中的漂移问题。该桥的监测方法也可以用于其它桥梁的施工中。     

黄土构造节理研究及其应用

作者发现大量不同力学性质的黄土构造节理后，识别了它们的区域性、系统性特征；认定其两组扭裂面代表新构造应力场最大剪切应力方向，利用黄土构造节理系及由其控制的土层沟槽网络恢复了相应地区Q3-4构造应力场；提出构造节理是黄土区地下水运移的主要通道和赋存的场所；发现构造节理是黄土区地裂缝、滑坡、崩塌和水土流失等地质灾害的构造基础之一，证实构造节理是黄土地层的软弱面，风化和继之而来的应力侵蚀就由此开始，进而逐步塑造黄土碟、穴、井、桥、柱、墙、沟等潜蚀地貌和部分侵蚀地貌。研究黄土构造节理对恢复新构造应力场、帮助预测地裂乃至地震活动、控制水土流失和滑塌灾害、进行工程乃至区域稳定性评价、重新认识黄土潜蚀地貌发育规律、指导干旱半干旱黄土区找水，既有理论意义又有实际意义。     

Studies on structural safety in stochastically excited Duffing oscillator with double potential wells

The effects of the Gaussian white noise excitation on structural safety due to erosion of safe basin in Duffing oscillator with double potential wells are studied in the present paper. By employing the well-developed stochastic Melnikov condition and Monte–Carlo method, various eroded basins are simulated in deterministic and stochastic cases of the system, and the ratio of safe initial points (RSIP) is presented in some given limited domain defined by the system’s Hamiltonian for various parameters or first-passage times. It is shown that structural safety control becomes more difficult when the noise excitation is imposed on the system, and the fractal basin boundary may also appear when the system is excited by Gaussian white noise only. From the RSIP results in given limited domain, sudden discontinuous descents in RSIP curves may occur when the system is excited by harmonic or stochastic forces, which are different from the customary continuous ones in view of the first-passage problems. In addition, it is interesting to find that RSIP values can even increase with increasing driving amplitude of the external harmonic excitation when the Gaussian white noise is also present in the system. The project supported by the National Natural Science Foundation of China (10302025 and 10672140). The English text was polished by Yunming Chen.     

Thermomechanical behavior of thermoset shape memory polymer programmed by cold-compression: Testing and constitutive modeling

Programming is a key process for thermally activated stress or strain recovery of shape memory polymers (SMPs). Typically, programming requires an initial heating above the glass transition temperature (T_g), subsequent cooling below T_g and removal of the applied load, in order to fix a temporary shape. This work adopted a new approach to program thermoset SMPs directly at temperatures well below T_g, which effectively simplified the shape fixing process. 1-D compression programming below T_g and free shape recovery of a thermoset SMP were experimentally investigated. Functional stability of the shape fixity under various environmental attacks was also experimentally evaluated. A mechanism-based thermoviscoelastic-thermoviscoplastic constitutive model incorporating structural and stress relaxation was then developed to predict the nonlinear shape memory behavior of the SMP trained below T_g. Comparison between the prediction and the experiment showed good agreement. The structure dependence of the thermomechanical behavior of the SMP was further discussed through a parametric study per the validated constitutive model. This study validates that programming by cold-compression is a viable alternative for thermally responsive thermoset SMPs.     

Global stability analysis of a 90°-bend pipe flow

The present work investigates the stability properties of the flow in a 90°-bend pipe with curvature $\delta =R/R_c=1/3$, with R being the radius of the cross-section of the pipe and $R_c$ the radius of curvature at the pipe centreline. Direct numerical simulations (DNS) for values of the bulk Reynolds number ${\mathit{Re}}_b=U_{b}D/\nu$ between 2000 and 3000 are performed. The bulk Reynolds number is based on the bulk velocity $U_b$, the pipe diameter D, and the kinematic viscosity $\nu$. The flow is found to be steady for ${\mathit{Re}}_b⩽2500$, with two main pairs of symmetric, counter-rotating vortices in the section of the pipe downstream of the bend. The presence of two recirculation regions is detected inside the bend: one on the outer wall and the other on the inner side. For ${\mathit{Re}}_b⩾2550$, the flow exhibits a periodic behaviour, oscillating with a fundamental non-dimensional frequency $\mathit{St}=\mathit{fD}/U_b=0.23$. A global stability analysis is performed in order to determine the cause of the transition from the steady to the periodic regime. The spectrum of the linearised Navier-Stokes operator reveals a pair of complex conjugate eigenvalues with positive real part, hence the transition is ascribed to a Hopf bifurcation occurring at ${\mathit{Re}}_{b,\mathit{cr}}\approx 2531$, a value much lower than the critical Reynolds number for the flow in a torus with the same curvature. The velocity components of the unstable direct and adjoint eigenmodes are investigated, and they display a large spatial separation, most likely due to the non-normality of the linearised Navier-Stokes operator. Thus, the core of the instability, also known in the literature as the wavemaker, is sought performing an analysis of the structural sensitivity of the unstable eigenmode to spatially localised feedbacks. The region located 15° downstream of the bend inlet, on the outer wall, is the most receptive to this kind of perturbations, and thus corresponds to where the instability originates. Since this region coincides with the outer-wall separation bubble, it is concluded that the instability is linked to the strong shear by the backflow phenomena. The present results are relevant for technical applications where bent pipes are frequently used, and their stability properties have hitherto not been studied.     

HL-2M偏滤器结构动力学分析

 用有限元软件分析了动载荷作用下的偏滤器结构动力学响应。通过对动力学和静力学计算结果的对比，确定载荷的动态放大因子。计算结果表明，所设计的偏滤器结构在瞬态电磁力载荷作用下能满足设计准则的要求。     

A simple,rapid and reliable liquid chromatography–mass spectrometry method for determination of methotrexate in human plasma and its application to therapeutic drug monitoring

A simple, rapid and reliable liquid chromatography–electrospray ionization tandem mass spectrometry method was established and validated for the determination of methotrexate in human plasma. After a straightforward protein precipitation by acetonitrile–water (70:30, v/v), methotrexate (MTX) and p‐aminoacetophenone (used as internal standard, IS) were separated on a Column C₁₈ column (50 × 2.1 mm, 3 µm; Column Technology, Fremont, CA, USA) using a gradient elution with mobile phase of acetonitrile and 0.03% acetic acid aqueous solution at a flow rate of 0.5 mL/min. The total chromatographic runtime was 5 min for each injection. Quantification detection was performed in a triple‐quadruple tandem mass spectrometer under positive mode monitoring the following mass transitions: m/z 455.3 → 308.3 for MTX and m/z 136.1 → 94.4 for IS. The calibration curve was linear over the range of 0.05–25.0 µmol/L with a lower limit of quantification of 0.05 µmol/L. The intra‐ and interday precisions were <5.2%, the accuracy varied from ?4.1 to 4.5%. The recovery was >94%. The LC‐MS/MS method showed an excellent agreement with the existing HPLC‐UV method using Passing–Bablok regression and Bland–Altman difference plot analysis. The validated LC‐MS/MS can be successfully applied to the routine therapeutic drug monitoring of MTX in clinical laboratories. Copyright © 2015 John Wiley & Sons, Ltd.